Jump to content

sevfiv

Full Member
  • Posts

    8,040
  • Joined

  • Last visited

  • Days Won

    6

Posts posted by sevfiv

  1. It is amazing how that area of W Gray (near Montrose) is changing (and the way Gibb's and Shaw's look now).

    W Gray is slowly being cleared of a lot of the residential element - I expect it will all be gone soon:

    06091856 610 W GRAY ST 77019 DEMO BLD/SEWER DISC

    08035090 1208 W GRAY ST A 77019 DEMO RES /SEWER DISC SEE PGJ # 8030901

    07102016 1212 W GRAY ST 77019 DANGEROUS BUILDING DEMO/RESIDENCE

    07013471 1324 W GRAY ST 77019 DEMO RES/ SEWER DISC

    09003259 1327 W GRAY ST 77019 DEMO RES/SEWER DISC

    08051406 1331 W GRAY ST 77019 DEMO RES/SEWER DISC

    08051404 1335 W GRAY ST 77019 DEMO RES/SEWER DISC

    1331 W Gray:

    wgray1331_062208.jpg

    1335 W Gray:

    wgray1335_062208.jpg

  2. It depends on the months. If there isn't much of a rate difference from a 60 month or a 48 month, then I'm inclined to take the 60 month, knowing if I come across bonus money I could just use that towards the principal and that will shorten my maturity date.

    that 3.99 sounds great, care to list the phone number of your credit union?

    I'll send a message to you with the link

  3. ^Yes correct, this is about finding a lower interest rate, not the cost or current payment amount.

    I'll rescind my earlier comment about bailing on the loan completely and add that it seems you found a good deal with the 4.99 - my credit union rate schedule starts at 3.99 for refinancing, but it also depends on the year of the car..

    Maybe look for something less than 60 months, too?

  4. There was a mention of it in the January/February 2008 issue of the Port of Houston magazine (part of a larger piece on shipping containers):

    A new home rapidly going up at 4306 Gibson relies on the strength of numerous steel containers in an ingenious design that is stopping traffic in this quiet West End neighborhood. The owner and designer of this innovative home is Aaron Scott, a young, energetic offshore oil and gas platform engineer working for SBM Atlantia. On nights and weekends since December, he has been assembling his dream home from 16 containers and eight flat racks. Scott had only a few conditions he wanted to meet in the design of his home. “I wanted a pool and spa on a roof high enough to enjoy Houston’s skyline and a big garage,” said Scott. His new home achieves that and much more.

    The first floor of the house is garage and storage. Not just any garage, but a garage that is eight shipping containers deep. The eight containers are parallel to the street with the rear doors facing inward so that they can be opened up for storage. Containers perpendicular to the street line the ground floor on the right side of the house and provide storage for motorbikes and similar machines. Flat racks covered with concrete form the floor for the second level. There is an open kitchen and living area overlooking the street through a gigantic two-story glass wall. Two bedrooms and a bath are also on this level. Shipping containers in the rear and on the side of the second and third levels offer space for dens, a home gym and storage. A third floor loft area overlooks the living area. The master bedroom and bath open onto a balcony that includes stairway access to the rooftop pool and spa. Steel beams hold the concrete walls in place. The doors of the containers that form the back wall of the house face outward so that they can be opened up to take advantage of the breeze or for light to come in through the glass door that will be installed inside the home to create a balcony beyond. When Scott began working on the design, he quickly realized that his rooftop getaway was too much for traditional wood frame construction. But by using a stack of shipping containers made from steel that are used to holding 60,000 pounds apiece, Scott’s dream is rapidly becoming a reality.

    http://www.portofhouston.com/pdf/pubaffair...MagJanFeb08.pdf

×
×
  • Create New...