Jump to content

Brava: 46-Story Residential High-Rise At 414 Milam St.

brijonmang

By brijonmang
in Downtown

 Share

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

jermh
jermh

Shot from today.

jermh
jermh
Highrise Tower
Highrise Tower

It was nice to meet you!  Thanks for coming out.   Here's my photos of the mat pour this morning.        

Posted Images

Purdueenginerd

Purdueenginerd

Posted
Posted
10 hours ago, jmitch94 said:

 

Is the "design" in the rebar to grip the concert, so it basically won't slide around inside? 

 

Yes! You want the concrete and rebar to act as a composite material. The rebar deformation patterns were standardized in 1947. Before then there was a lot of variance on rebar deformation patterns and a lot of proprietary shaping by manufacturers . Even older concrete structures (Normally pre-1920's)  have "smooth" bar. 

  • Like 6
  • Thanks 1
Link to comment
Share on other sites
Luminare

Luminare

Posted
Posted
15 minutes ago, Purdueenginerd said:

 

Yes! You want the concrete and rebar to act as a composite material. The rebar deformation patterns were standardized in 1947. Before then there was a lot of variance on rebar deformation patterns and a lot of proprietary shaping by manufacturers . Even older concrete structures (Normally pre-1920's)  have "smooth" bar. 

 

Its fun reading old Architectural Record publications because you start seeing old adds for things like this or the new "revolution" or "miracle" materials. Such as when you read the very first issue which was like 1899? talking about Terracotta veneers and then in the 1920's  with things like concrete.

  • Like 1
Link to comment
Share on other sites
H-Town Man

H-Town Man

Posted
Posted
1 hour ago, Purdueenginerd said:

 

Yes! You want the concrete and rebar to act as a composite material. The rebar deformation patterns were standardized in 1947. Before then there was a lot of variance on rebar deformation patterns and a lot of proprietary shaping by manufacturers . Even older concrete structures (Normally pre-1920's)  have "smooth" bar. 

 

I imagine there are some oddball engineers who collect samples of the old rebar patterns the way people collect early barbed wire patterns.

 

  • Like 2
Link to comment
Share on other sites
Purdueenginerd

Purdueenginerd

Posted
Posted
3 hours ago, H-Town Man said:

 

I imagine there are some oddball engineers who collect samples of the old rebar patterns the way people collect early barbed wire patterns.

 

I know a few actually who do. 

 

I do collect old AISC steel construction manuals (though I use them for work still on occasion)

 

Right now I have 1st, 5th, 6th, 7th, 8th, 9th, 13th, 14th, 15th edition. My 1st edition is dated January 1930. Found it for about 60 dollars online. The 5th, 6th, 7th, 8th, 9th I have found at Half-Price Books over the years, each for about 15-20 dollars. 13-15 Ive used in my professional career so I bought them when they were/are still active codes. 

  • Like 9
Link to comment
Share on other sites
hindesky

hindesky

Posted
Posted

I talked with a Harvey worker who seemed to be in the know. I asked about the tower crane and he said this will be the only tower crane, they were going to have one on the southeast corner that would have been a luffer. It was decided that the crawler crane will build the podium and when it rises above the Hogg building they will install the tower crane. Mat ready mix pour will be on Sunday Dec. 8th starting at 2am and last for about 16 hrs.

  • Like 5
Link to comment
Share on other sites
Avossos

Avossos

Posted
Posted
21 hours ago, ekdrm2d1 said:

 

It was nice to meet you!  Thanks for coming out.

 

Here's my photos of the mat pour this morning.

 

 

 

Great meeting you as well! I enjoyed your take / passion for large scale construction projects. Looking at your pictures, you definitely have a good eye... Our pictures were good, but I think you caught the scale of development and effort much better.

  • Like 3
Link to comment
Share on other sites
Luminare

Luminare

Posted
Posted
20 minutes ago, Nate99 said:

Baking foundation...

 

 

4517AC98-7A33-4188-B6FE-0448F712D156.jpeg

4844DAC0-889E-4451-A3D2-7D2944416CEA.jpeg

 

Wouldn't it be fun if you could actually "bake" a building. In this example with all the tarps the building could come out like a souffle. Just pull the tarps and out grows a full building.

  • Haha 4
Link to comment
Share on other sites
  • Popular Post
Purdueenginerd

Purdueenginerd

Posted
  • Popular Post
Posted
20 hours ago, Luminare said:

 

Wouldn't it be fun if you could actually "bake" a building. In this example with all the tarps the building could come out like a souffle. Just pull the tarps and out grows a full building.

 

A few years ago I had a repair project at petrochemical facility where we had a mass-pour with a high-early strength concrete. A 2' thick concrete roof deck for a below grade structure.  After the concrete set (to give you context on how fast it was setting, I could walk on one side of the roof while the other side I would sink into), the contractor basically flooded the top of the concrete with 3 inches of water. The next morning, I recorded the water temperature at 120ºF. It was stunning to me how much energy it put out curing. The contractor indicated they had a fire break out several years back because of extreme exotherming of the setting concrete. 

  • Like 10
Link to comment
Share on other sites
  • Popular Post
Purdueenginerd

Purdueenginerd

Posted
  • Popular Post
Posted
5 minutes ago, wxman said:

Can somebody please explain what's going  on here? I've never seen or heard of this before. What makes this different from all the other pours where they pump the concrete in and it's done?

 

Concrete curing procedures are based on ACI 308.1 (http://dl.mycivil.ir/dozanani/ACI/ACI 308.1-98 Standard Specification for Curing Concrete_MyCivil.ir.pdf) (link is for the 1998 version, I think the latest version is actually 13). Can't tell what they've put down from the photos but at least from 200' away they appear to be complying with section 2.

 

A contractor, should follow curing procedures on all of their concrete placements. Outdoor Flat work pours are especially susceptible to damage if procedure isnt followed. 
 

Quote

 

SECTION 2—MOISTURE RETENTION 2.1—

General 2.1.1 Description—This section covers methods and procedures for curing concrete using plastic sheets, plastic sheets bonded to water-absorbent fabric, or reinforced paper.
2.2—Products

2.2.1 Plastic sheets shall be polyethylene with a minimum thickness of 0.1 mm (0.004 in.) or 4 mil plastic sheets bonded to water-absorbent fabric shall have a minimum thickness of 0.1 mm (0.004 in.) or 4 mil polyethylene film bonded to a layer of cotton, burlap, manufactured fabric, or other absorptive material. Sheets shall meet the requirements of ASTM C 171.

2.2.2 Reinforced paper shall consist of two layers of kraft paper bonded with a layer of bituminous adhesive, reinforced with non-asbestos fibers. Reinforced paper shall comply with ASTM C 171. 2.3—

Execution 2.3.1 Place material on the concrete surface as soon as possible without marring the surface. Cover all exposed concrete surfaces and beyond the edge of the concrete surface. Securely tape sheets together or lap them. Maintain the integrity of the material and the ability to contain the water on the concrete surface throughout the curing period. 2.3.2 Verify that the concrete is continuously wet under the sheets; otherwise, add water through soaker hoses under the sheets.

2.3.3 Use black or dark colored plastic sheets when the daily high ambient temperature is below 15 C (60 F). Use white or similarly reflective plastic sheets when the daily high ambient temperature is above 30 C (8 5F). Use any color or transparency of plastic sheet at temperatures between 15 and 30 C (60 and 85F)

 

 

The reason for performing these actions is because when concrete cures, the chemical reaction of water and cementitious materials puts off heat, ie, it is an exothermic reaction. A temperature differential between the interior and the exterior faces of the concrete can built up tensile stresses and cause large cracking in the face of the concrete (this is bad!) In addition, for flatwork and/or outside pours, air flow, evaporation, and sunlight can change the strength characteristics of exposed sections of the concrete(this is bad!). Curing procedures are put in place to make sure these bad things dont happen or are mitigated. IE, ensuring that exothermic concrete can dissipate heat more quickly, or alternatively, make the concrete uniformly warm. 

 

For Mass pours.. or concrete placements that are huge. Additional steps have to be taken to mitigate these affects. ACI207.1R-14 (http://dl.mycivil.ir/dozanani/ACI/ACI 207.1R-05 Guide to Mass Concrete_MyCivil.ir.pdf) (i've provided an older version). Provides guidelines and specifications on how to handle that. The history section of the commentary is quite educational if you'd like to learn more. There are additional specifications for Hot weather and Cold Weather concreting. 

 

 

  • Like 11
  • Thanks 10
Link to comment
Share on other sites
jmitch94

jmitch94

Posted
Posted

Soooo glad you posted this I was about to ask if they needed to do anything to cool down pours this big. I'm a decent history buff and have heard a 100 times about how they had to run cooling pipes in the Hover dam because the heat generated would be immense and I was wondering if pours of this size needed cooling down too. 

  • Like 4
Link to comment
Share on other sites
Nate99

Nate99

Posted
Posted
14 hours ago, jmitch94 said:

Soooo glad you posted this I was about to ask if they needed to do anything to cool down pours this big. I'm a decent history buff and have heard a 100 times about how they had to run cooling pipes in the Hover dam because the heat generated would be immense and I was wondering if pours of this size needed cooling down too. 


I saw a documentary on the Burj Khalifa where they showed the construction crew dumping massive amounts of ice into the concrete mix as it made its way to the pumps. Interesting stuff. 

  • Like 4
Link to comment
Share on other sites
Purdueenginerd

Purdueenginerd

Posted
Posted
8 minutes ago, Nate99 said:


I saw a documentary on the Burj Khalifa where they showed the construction crew dumping massive amounts of ice into the concrete mix as it made its way to the pumps. Interesting stuff. 

 

more common than you think! Even for small-ish pours. Refer to section 2.4

 

http://dl.mycivil.ir/dozanani/ACI/ACI 305R-99 Hot Weather Concreting_MyCivil.ir.pdf    (older version)

 

 

  • Like 4
Link to comment
Share on other sites
  • Popular Post
hindesky

hindesky

Posted
  • Popular Post
Posted

The tower crane is going up this weekend and Milam and Prairie will be partially closed.

Reduced Traffic Lanes on Milam and Prairie
Friday, December 20 - Sunday, December 22
Harvey will be reducing the traffic lanes on Milam and closing the 700 block of Prairie Street in order to erect our tower crane. The closures are scheduled to begin 12/20 at 7 pm and continue until 12/22 at 11:59 pm.

During these hours, Milam traffic on the 400 and 500 block will be reduced to a single lane on the east side with all business entrances along Milam remaining accessible. Prairie street will also be reduced to a single lane on the 800 block (northern lane). Lastly, the western traffic on Prairie will be required to turn south onto Milam with a full closure of the 700 block of Prairie.
Contact: DE HARVEY, Dean Braddock 😄 832-768-7331

 

QRYvng3.png

  • Like 8
  • Haha 8
Link to comment
Share on other sites
ArtNsf

ArtNsf

Posted
Posted (edited)
On 12/19/2019 at 9:15 PM, hindesky said:

The tower crane is going up this weekend and Milam and Prairie will be partially closed.

Reduced Traffic Lanes on Milam and Prairie
Friday, December 20 - Sunday, December 22
Harvey will be reducing the traffic lanes on Milam and closing the 700 block of Prairie Street in order to erect our tower crane. The closures are scheduled to begin 12/20 at 7 pm and continue until 12/22 at 11:59 pm.

During these hours, Milam traffic on the 400 and 500 block will be reduced to a single lane on the east side with all business entrances along Milam remaining accessible. Prairie street will also be reduced to a single lane on the 800 block (northern lane). Lastly, the western traffic on Prairie will be required to turn south onto Milam with a full closure of the 700 block of Prairie.
Contact: DE HARVEY, Dean Braddock 😄 832-768-7331

 

QRYvng3.png

 

Okay, I'll say it.  Wow, just wow.  I'm so happy they are alerting us to this erection. LOL !  Good news however that it has started though.

 

Edited by ArtNsf
correction of grammer/spelling
  • Like 1
  • Haha 8
Link to comment
Share on other sites
mls1202

mls1202

Posted
Posted

Sorry if this has been mentioned elsewhere, but I am surprised at how close it is to the adjacent building (Hogg).  If those windows are residential units (as opposed to say, an interior hallway, the value of those units has to be pretty much destroyed as they will be looking straight into what I imagine is a parking garage!

  • Like 2
Link to comment
Share on other sites
hindesky

hindesky

Posted
Posted
2 minutes ago, Urbannizer said:

Why was the tower crane installation delayed?

I don't know. Wanted to ask a guy I had talked to before but he was always on the phone when I rode by. There was an At crane on the south side but it wasn't anywhere big enough to set tower crane parts. I assume the crawler crane might set parts of it but it doesn't have the main block on it and when I operated a crawler crane like this it's only good for about 15,000 lbs on the jib.

DLPcPtm.jpg

  • Like 8
Link to comment
Share on other sites
jermh

jermh

Posted
Posted
On 12/23/2019 at 6:39 PM, mls1202 said:

Sorry if this has been mentioned elsewhere, but I am surprised at how close it is to the adjacent building (Hogg).  If those windows are residential units (as opposed to say, an interior hallway, the value of those units has to be pretty much destroyed as they will be looking straight into what I imagine is a parking garage!

 

Hogg Palace is more or less an Airbnb style hotel at this point. You can find a bunch of the apartments for rent on sonder. As for the view, I'm betting you're right! Depending on the height of the garage, those windows are going to get a lot of privacy or a close up view of the Preston's pool deck. 

  • Like 1
Link to comment
Share on other sites
hindesky

hindesky

Posted
Posted (edited)

Same email I got last week but I think it's going to happen this time

And @Avossos said so too.

 

Reduced Traffic Lanes on Milam and Prairie
Friday, December 27 - Sunday, December 29
Harvey will be reducing the traffic lanes on Milam and closing the 700 block of Prairie Street in order to erect our tower crane. The closures are scheduled to begin 12/27 at 7 pm and continue until 12/29 at 11:59 pm.

During these hours, Milam traffic on the 400 and 500 block will be reduced to a single lane on the east side with all business entrances along Milam remaining accessible. Prairie street will also be reduced to a single lane on the 800 block (northern lane). Lastly, the western traffic on Prairie will be required to turn south onto Milam with a full closure of the 700 block of Prairie.
Contact: DE HARVEY, Dean Braddock  c:832-768-7331

 

NTJ8rBj.png

Edited by hindesky
  • Like 4
Link to comment
Share on other sites
  • The title was changed to Brava: 46-Story Residential High-Rise For Block 42
  • The title was changed to Brava: 46-Story Residential High-Rise At 414 Milam St.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
 Share
Go to topic listing
×
×
  • Create New...