Jedidiyah Posted September 24, 2014 Share Posted September 24, 2014 I live in a condo with a large glass sliding door to the balcony. There is a lot of street noise, so I'd like to soundproof it. I was told that another door with a special glass has to be installed in front of it to create an air gap. The problem is that the installation company couldn't find a supplier for the special glass, so they had to cancel. Does anybody know other companies in Houston that do this sort of thing and have a good record? Link to comment Share on other sites More sharing options...
innerlooper Posted September 29, 2014 Share Posted September 29, 2014 Don't know about the special glass. Maybe laminated? You could just use insulated glass, that would help with the noise. On the north side of 2016 Main (high rise) there is a lot of noise off the Pierce elevated and some residents have installed a second set of sliders inside the original ones. Some angle the new doors slightly (into a vee, with the center stile further away from the old doors) to create even better soundproofing performance. Link to comment Share on other sites More sharing options...
Jedidiyah Posted October 3, 2014 Author Share Posted October 3, 2014 Don't know about the special glass. Maybe laminated? You could just use insulated glass, that would help with the noise. On the north side of 2016 Main (high rise) there is a lot of noise off the Pierce elevated and some residents have installed a second set of sliders inside the original ones. Some angle the new doors slightly (into a vee, with the center stile further away from the old doors) to create even better soundproofing performance. Thanks. But I can not do such installation myself, and the only company I could find (Sun and Sound) told me after about two months that their supplier couldn't deliver. What other companies do it in Houston? Link to comment Share on other sites More sharing options...
innerlooper Posted October 6, 2014 Share Posted October 6, 2014 Well a second set of sliders inside the first is a glazier working with a contractor job....will need a studwall to fill in the top and sides. Maybe ask at Heights Glass, they've been around for ages. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.